Ground Water Level Indicator
OSC483FO105
Features
-It is a portable device determined for the measurements of the ground water level in the bores.
-The device comprises the sensor, cable roll, cable length measuring unit and the basement.
-The electronics is located in the centre of the cable roll.
-For measuring the device is supported on the bore or the supportive stand nearby the bore.
-The device may be held also in hand. After the counter of table
-After the counter of cable length measuring unit is cleared by pushing the lever at right side of the counter the cable with the sensor is led into the bore.
-At the same time the cable must go through the cable length measuring unit.
-If the sensor reaches the water the electrical signal will switch in the light and the sound signals.
-The reading of the counter corresponds to the level of the ground water in the bore.
-The cable length measuring unit has two counting modes;
adding pulling the cable down out of the cable roll and subtracting pulling it back in reversed direction.
-This makes the measuring specially comfortable.
-The cable roll is equipped with the handle to facilitate the cable rewinding.
-For transport the Ground Water Level Indicator is placed into the bag.
| Model | OSC 483FO 105 |
| Counter measuring unit | 1cm |
| Counter range | 999.99m |
| Cable length registration accuracy | ±1cm |
| Cable length | 30 to 200m (depending on the other) |
| Max measuring speed | 60m/ min |
| Sensor diameter | 15mm |
| Operating voltage | 12V DC |
| Working temperature | -5℃ to +40℃ at 100% relative humidity |
pdf brochure