Multi Heat Exchanger - OSC77FD240TH

Multi Heat Exchanger
OSC77FD240TH

Features

-The apparatur is used for studying of three types of heat exchangers namely-concentric tube, shell and tube and plate-under parallel or counter flow conditions
-The unit consists of the three heat exchangerr, a hot water tank with a transfer pump, instruments for monitoring and contorol
-Changing from parallel to counter flow or from one type of heat exchanger to another is simply done by rearranging flexible hoses with quick couplings

Typical Experiments

-Study of heat transfer for concentric tube, shell and tube or plate heat exchanger
-Study of heat transfer under parallel or counter flow at various flow rates and temperature differences
-Heat transfer coefficient at various rates of flow and temperature difference

Specifications
Model		OSC 77FD 240TH
Heat exchangers		Concentric tube : Stainless steel outer and inner tubes,
		heat transfer area approx. 600cm2
		Shell and tube : Stainless steel shell and 7 inner tubes, heat transfer
		area approx. 600cm2
		Plate : Stainless steel multiple plates, heat transfer area approx. 600cm2
		Flexible hose : 4 ea
Temperature sensors		4 ea for hot and cool water inlets and outlets
		2 ea for hot and cool water mid section of the concentric tube
		1 ea for hot water tank
A service module		A hot water pump
		A hot stainless steel water tank with a level switch to prevent heater operation
		if level is too low
		Heater : 3000W
		2 sets of temperature indicator with selector switch
		Temperature control unit to limit temperature of hot water to not more than 80℃
		Flow meters : Hot water 0.4 to 4L/m, Cold water 1 to 7L/m
Power supply		220V 1Ph 50Hz. Other power supply is available on request
Size (WｘLxH)		Approx. 650 x 1500 x 650 mm
Weight		Approx. 75kg

Multi Heat Exchanger OSC77FD240TH

Multi Heat Exchanger
OSC77FD240TH