Moving Die Rheometer
OSC997FU001
Features
1. Multiple test information
a. For each test, more than 7 types of curves related viscoelastic properties could be measured.
b. Test results: After each test, automatically calculate more than 120 bits of data and results.
c. Elastic torque: such as ML,MH,MS1,MS2,MS50,MC90...etc.
Cure time: such as TS1, TS2, TC50, TC90, TC95...etc.
Cure rate: such as CRI (cure rate index), MCR(maximum cure rate)...etc.
Max. and min. values of each curve: such as Tanδmax,δmax,S”max...etc.
Times related to specified points: such as T@ Tanδmax,T@MCR...etc..
2. Quick temperature recovery
a. Shortening the pre-heat time: Directly heated dies, precision platinum resistance temperature sensors,
and plus the professional temperature control software shorten the time of preheat.
b. Quick die temperature recovery - High efficiency heat conduction structures and temperature control
components significantly shorten the time of die temperature recovery and ensure the stability of
die temperature in each test.
c. The die temperatures shall recover to the setting value within 35 sec. after the test is started.
3. Processing and Saving data
Data collection, processing and saving are carried out automatically by the professional software.
By means of high speed and massive amount of data process capabilities, all the testing specifications can
be preset and saved to reduce the operations before test started.
a. Auto-calculation - During the test or the end of test, the computer can automatically calculate and save the
test results and user can select desired files and put it into the editable report.
b. Saving Data - Large capacity of memory device is available for saving all the testing results and curves for
the resources of data analysis and review.
c. SPC software including X-MR, X-R, Histogram, Normal Distribution Charts enables users analyze
the test results of curing data such as ML MH, TS, TC.
d. All the data of testing can be imported to the EXCEL software to have advanced statistics and analyses.
4. Curves and data retrieve
a. Colors - of curves displayed on the screen can be selected.
b. Data view - Move the cursor of mouse to the testing curve, the related time and data value of that point
will be automatically shown on the menu.
c. Zoom the curve - The curves can be zoomed at any scale by the user during or after test.
5. Simplified Operation
a. User-Friendly operation system - Windows OS software offers easy and friendly operation and interfacing
between the instrument and user. The time to learn the operations of this instrument are very short.
b. Easy specimen removal . Our new conical die cavity design enables the operator to remove the
test specimens more easily.
6. Calibration By using the friendly calibration software, the torque calibration can be easily accomplished after the torque standard was installed onto the instrument.
7. Quality Control Quality control function provides the user to set the control limits at any specified point.
| Model | OSC 997FU 001 | |||
| Standards | ASTM D5289, ISO 6502 | |||
| Oscillating frequency | 100 cycle/min. (1.66Hz) | |||
| Oscillating amplitude | +/- 0.5°, +/- 1.0°, +/- 3.0° | |||
| Temperature | Computer assistance control | |||
| Usable range from ambient to 200deg.C | ||||
| High temperatures are available on customer’s order | ||||
| Measurement Units | Torque: lb-in, kg-cm, dN-m, Temperature: deg.C | |||
| Sample volume | About 4.5 cm3 | |||
| Graphic output | 1)?? Elastic torque curve | |||
| 2) Foam Pressure curve | ||||
| 3) Viscous torque curve | ||||
| 4) Tangent delta curve | ||||
| 5) Loss angle curve | ||||
| 6) Viscous-Elastic complex curve | ||||
| 7) Upper & lower dies temperature curves | ||||
| Air pressure | About 5.0 kg/cm2 (or 0 .5 Mpa) | |||
| Electrical | 100VAC+/-10%, 50/60+/-3Hz, 7 amp single phase | |||
| Approx. Dimensions | Main machinery: 85(D) x 62(W) x 135(H) cm | |||
| Subsidiary-machinery: 65(D) x 80(W) x 80(H) cm | ||||
| (the data processing devices with a wooden desk) | ||||
| Approx. Weights | Main machinery: 255 kg., Subsidiary machinery: 45 kg. | |||
pdf brochure